MC10EP56MNTXG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Differential Digital Multiplexer |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V |
| Subcategory | Multiplexer/Demultiplexers |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | ±3V~5.5V |
| Terminal Position | QUAD |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 10EP56 |
| Pin Count | 20 |
| Circuit | 2 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Propagation Delay | 470 ps |
| Turn On Delay Time | 500 ps |
| Family | 10E |
| Logic Function | Multiplexer, Mux |
| Output Characteristics | SERIES-RESISTOR |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 78mA |
| Number of Input Lines | 4 |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 2 |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10EP56MNTXG Overview
As a means of saving space, digital switch is provided in the 20-VFQFN Exposed Pad.Tape & Reel (TR) represents its packaging.In terms of mounting, digital switch ic uses the method of Surface Mount.A digital IC Differential Digital Multiplexer is used as the analog component of the multiplexers.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.When operated with a ±3V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.As a member of 10EP series, the multiplexers can be used for a wide range of applications.As parts of its basic configuration, 20 terminations are desgined.The base part number is 10EP56, so you can find its logic switch related parts using that number.In this case, 3.3V is the voltage supplied to the multiplexer's system.This turn signal switch contains 20 component pins.There is a type of supply of Dual.There are 20 pins on it.The mount is in Surface Mount.The logic switch is a member of the 10E family.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 3V.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.The digital switch ic is a part of an electronic system classified as Multiplexer/Demultiplexers.In accordance with TAPE AND REEL, switches can be packaged.In order to accept voltage levels, the multiplexers have input lines 4 on the board.As the signal source, there are 2 output lines.It also provides improved characteristics of NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V.
MC10EP56MNTXG Features
Supplied in the 20-VFQFN Exposed Pad package
Adopting a supply type of Dual
4 input lines
2 output lines
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V
MC10EP56MNTXG Applications
There are a lot of ON Semiconductor MC10EP56MNTXG Signal Switches / Multiplexers / Decoders applications.
- Night vision cameras
- Microprocessor instruction decoding
- Signal router
- Used to connect a single source to multiple destinations
- Data transfer
- Small scale TV wall
- Decimal decoder
- Data distribution
- Speed synchronization of multiple motors in industries
- Injectors
