MC10EP57DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 10EP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Differential Digital Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V; |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | ±3V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP57 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Circuit | 1 x 4:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Throw Configuration | DPST |
| Propagation Delay | 475 ps |
| Quiescent Current | 52mA |
| Family | 10E |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Prop. Delay@Nom-Sup | 0.52 ns |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 65mA |
| Number of Input Lines | 4 |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
MC10EP57DT Overview
Due to the lack of space on the board, digital switch is provided in the 20-TSSOP (0.173, 4.40mm Width).Tube represents its packaging.In terms of mounting, digital switch ic uses the method of Surface Mount.For the analog part of the multiplexers, an IC Differential Digital Multiplexer is used.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.A supply voltage of ±3V~5.5V provides digital controlled switch's superior flexibility for designers.Multiplexers from the 10EP series can be used in a wide range of applications.The basic configuration of this system includes 20 terminations.There is a base part number 10EP57 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 3.3V volts.This turn signal switch consists of 20 component pins.As a result, conductors end at GULL WING.Its supply type is Dual, which is used as the source of power.A configuration of 20 pins is used.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch belongs to the family of 10E.The minimal supply voltage (Vsup) should be kept at 3V to avoid some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.It is provided that -5.2V has a power supply in order to function normally.There are 1 outputs designed for the operation of the turn signal switch.Without any external influences, it consumes 52mA current of multiplexer ic at all times.RAIL is used to package the switches.A voltage level can be inserted into the 4 input lines of multiplexers.In addition, it provides improved characteristics compared to NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V;.
MC10EP57DT Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual
Power supplies of -5.2V
4 input lines
NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V;
MC10EP57DT Applications
There are a lot of ON Semiconductor MC10EP57DT Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor output
- Make full adder
- A robotic vehicle with the metal detector
- Memory system of computers
- Automation system
- Time division multiplexing system
- Data demultiplexing
- Electronics industry
- Logic circuits
- Video transmission
