MC10EP57DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| Series | 10EP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Differential Digital Multiplexer |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V; |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | ±3V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP57 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Circuit | 1 x 4:1 |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Throw Configuration | DPST |
| Propagation Delay | 475 ps |
| Family | 10E |
| Logic Function | Multiplexer |
| Max Input Voltage | 2.48V |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 0.52 ns |
| High Level Output Current | -50mA |
| Dual Supply Voltage | 5.5V |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 65mA |
| Number of Input Lines | 4 |
| Voltage Supply Source | Dual Supply |
| Height | 1.2mm |
| Length | 6.6mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC10EP57DTG Overview
Providing this information in the 20-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.Tube represents its packaging.The mounting method digital switch ic uses is Surface Mount.The multiplexers uses an analog IC Differential Digital Multiplexer as the analog part of the circuit.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.With a supply voltage of ±3V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers from the 10EP series can be used in a wide range of applications.As parts of its basic configuration, 20 terminations are desgined.The part number for 10EP57 can be used to find its logic switch related parts as well.The multiplexer's system is powered by 3.3V voltage.This turn signal switch contains 20 component pins.Conductors terminate at GULL WING in this design.This supply type employs Dual.The board has 20 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is included into the family of 10E.It is recommended that the minimum supply voltage (Vsup) be kept at 3V to avoid some unnecessary failures.For mux switch's normal operation, power supply -5.2V is provided.For the turn signal switch's operation, there are 1 outputs.The switches package is packaged in accordance with the RAIL method.On the multiplexers, 4 input lines are provided for accepting voltage levels.In addition, it provides improved features of NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V;.
MC10EP57DTG Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual
Power supplies of -5.2V
4 input lines
NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V;
MC10EP57DTG Applications
There are a lot of ON Semiconductor MC10EP57DTG Signal Switches / Multiplexers / Decoders applications.
- Automatic Monitoring systems
- Microprocessor memory systems
- RF-based home automation system
- Small scale TV wall
- Analog, digital or video signal switching
- Frequency multiplexing system
- Data communication
- Idle motor
- Electronically controlled engine system
- Home automation system
