MC10EP57DTR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 10EP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | Differential Digital Multiplexer |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V; |
| Technology | ECL |
| Voltage - Supply | ±3V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Circuit | 1 x 4:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Family | 10E |
| Number of Inputs | 4 |
| Output Polarity | COMPLEMENTARY |
| Propagation Delay (tpd) | 0.475 ns |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MC10EP57DTR2 Overview
Providing this information in the 20-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.Tape & Reel (TR) represents its packaging.The method digital switch ic adopts for mounting is Surface Mount.the multiplexers uses IC Differential Digital Multiplexer as the analog IC.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a ±3V~5.5V supply voltage.As a member of 10EP series, the multiplexers can be used for a wide range of applications.As parts of its basic configuration, 20 terminations are desgined.The voltage supplied for multiplexer's system is 3.3V.multiplexer's systemThere are 20 component pins in this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.The logic switch is a member of the family of 10E.It is recommended that the minimum supply voltage (Vsup) be kept at 3V so that unnecessary failures can be prevented.It is advisable that the maximal supply voltage (Vsup) remains at 5.5V to avoid some unnecessary failures.There are 1 outputs designed to operate the turn signal switch.This multiplexer provides 4 inputs.Additionally, it improves the characteristics of NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V;.
MC10EP57DTR2 Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V;
MC10EP57DTR2 Applications
There are a lot of Rochester Electronics, LLC MC10EP57DTR2 Signal Switches / Multiplexers / Decoders applications.
- Data collection system
- Injectors
- Microprocessor instruction decoding
- Image transmission
- Make half adder
- Data distribution
- High-performance memory-decoding applications
- GLAN
- Recording transmission
- Arithmetic Logic Units
