MC10EP57MNG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Weight | 123.008581mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Differential Digital Multiplexer |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V; |
| Subcategory | Multiplexer/Demultiplexers |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | ±3V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP57 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Circuit | 1 x 4:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Propagation Delay | 475 ps |
| Family | 10E |
| Logic Function | Multiplexer, Mux |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 0.52 ns |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 65mA |
| Number of Input Lines | 4 |
| Voltage Supply Source | Dual Supply |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC10EP57MNG Overview
For the purpose of saving board space, digital switch is included in the 20-VFQFN Exposed Pad.In this case, it is packaged as Tube.The method digital switch ic adopts for mounting is Surface Mount.Differential Digital Multiplexer is the analog IC that the multiplexers uses.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.When digital controlled switch operates at ±3V~5.5V, designers have superior flexibility.Since they are members of the 10EP series, they can be used in a wide variety of applications.Among its basic features are 20 terminations.The base part number is 10EP57, which is also useful when looking up signal switch's related components.In this case, 3.3V is the voltage supplied to the multiplexer's system.This turn signal switch consists of 20 component pins.Dual is employed as its supply type.Currently, it is configured with 20 pins.Multiplexer ics are mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the 10E family.Keep Vsup at 3V to avoid unnecessary failures.Avoid unnecessary failures by keeping Vsup at 5.5V.The power supply of -5.2V is provided for mux switch's normal operation.The turn signal switch operates with 1 outputs.The part belongs to the Multiplexer/Demultiplexers category of signal switches.The switches package is packaged in a way which is consistent with RAIL.The multiplexers have 4 input lines used to accept voltage levels.Also, it provides an improved version of the characteristics of NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V;.
MC10EP57MNG Features
Supplied in the 20-VFQFN Exposed Pad package
Adopting a supply type of Dual
Power supplies of -5.2V
4 input lines
NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V;
MC10EP57MNG Applications
There are a lot of ON Semiconductor MC10EP57MNG Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- Time division multiplexing system
- Data distribution
- Frequency multiplexing system
- Image transmission
- GLAN
- Home automation system
- Enabling different functions units in microprocessor instruction decoding
- HDMI applications
- Logic circuits
