MC10EP58DG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Multiplexer |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | ±3V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP58 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Circuit | 1 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Throw Configuration | DPST |
| Propagation Delay | 410 ps |
| Family | 10E |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 2 |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 40mA |
| Voltage Supply Source | Dual Supply |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10EP58DG Overview
In order to save board space, digital switch is located in the 8-SOIC (0.154, 3.90mm Width).It is packaged according to the Tube method.As far as mounting is concerned, digital switch ic uses Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at ±3V~5.5V, designers have superior flexibility.Multiplexers from the 10EP series can be used in a wide range of applications.Among its basic features are 8 terminations.The part number for 10EP58 can be used to find its logic switch related parts as well.For multiplexer's system, a voltage of 3.3V is supplied.This turn signal switch has 8 component pins.As a result, conductors end at GULL WING.This supply type employs Dual.It is configured with 8 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the family of 10E.To avoid unnecessary failures, keep the supply voltage at 3V (Vsup).It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.The turn signal switch has 1 outputs designed for operation.The multiplexer provides 2 inputs.The signal switching is packaged by RAIL. In addition, NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V exhibits improved characteristics.The digitalswitch relies on 1 circuits to function normally.
MC10EP58DG Features
Supplied in the 8-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V
MC10EP58DG Applications
There are a lot of ON Semiconductor MC10EP58DG Signal Switches / Multiplexers / Decoders applications.
- Data bus control
- LVDS
- Logic circuits
- Analog, digital or video signal switching
- Data communication
- Automation system
- Data collection system
- Robotic vehicles
- GLAN
- War field flying robot with a night vision flying camera
