MC10EP58DR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 10EP |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Multiplexer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | ±3V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10EP58 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Propagation Delay | 410 ps |
| Family | 10E |
| Logic Function | Mux |
| Output Characteristics | OPEN-EMITTER |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Power Supply Current-Max (ICC) | 40mA |
| Number of Input Lines | 2 |
| Voltage Supply Source | Dual Supply |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10EP58DR2 Overview
Digital switch is provided in the 8-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC is indicated by Multiplexer.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a ±3V~5.5V supply voltage.Since they are members of the 10EP series, they can be used in a wide variety of applications.The basic configuration of this system includes 8 terminations.As its base part number is 10EP58, logic switch can also be used to find its related parts.The multiplexer's system is supplied with a voltage of 3.3V.In this turn signal switch, there are 8 component pins.It employs GULL WING as the point at which conductors come to an end.This supply type employs Dual.With 8 pins, it is configured.The mounting is in the way of Surface Mount.Among the family of 10E the logic switch is a member.Keeping the minimum supply voltage (Vsup) at 3V prevents some unnecessary failures.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.As part of the operation of this turn signal switch, there are 1 outputs.The switches is packaged according to the way of TAPE AND REEL.To accept voltage levels, the multiplexers have2 input lines.In addition, NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V exhibits improved characteristics.
MC10EP58DR2 Features
Supplied in the 8-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual
2 input lines
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V
MC10EP58DR2 Applications
There are a lot of ON Semiconductor MC10EP58DR2 Signal Switches / Multiplexers / Decoders applications.
- Frequency multiplexing system
- Signal router
- Microprocessor input/output systems
- RF-based home automation system
- Steel plants
- Image transmission
- Robotic vehicles
- CPU memory location identification
- Metal detectors
- D/A converters
