MC10EP58DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 10EP |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Multiplexer |
| Additional Feature | NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | ±3V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10EP58 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 2:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Throw Configuration | DPST |
| Propagation Delay | 410 ps |
| Quiescent Current | 30mA |
| Family | 10E |
| Supply Type | Dual |
| Power Supply Current-Max (ICC) | 40mA |
| Number of Input Lines | 2 |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10EP58DT Overview
In order to conserve board space, digital switch is included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).The package is in the form of Tube.Digital switch ic adheres to a mounting method of Surface Mount.In the multiplexers, the analog IC is indicated by Multiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When operated with a ±3V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Several applications are possible for 10EP series multiplexers.Among its basic configurations are 8 terminations.You can also find related parts by using its logic switch base part number of 10EP58.The voltage supplied for multiplexer's system is 3.3V.multiplexer's systemThis turn signal switch contains 8 component pins.As the end of conductors, it uses GULL WING.This supply type employs Dual.The board is configured with 8 pins.As you can see, it is mounted in the direction of Surface Mount.In the 10E family, the logic switch is included.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 3V.Keeping Vsup at 5.5V will prevent some unnecessary failures.The turn signal switch has 1 outputs designed for operation.Without external influences, it consumes 30mA current of multiplexer ic.The switches is packaged according to the way of RAIL.To accept voltage levels, the multiplexers have2 input lines.In addition, it provides improved features of NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V.
MC10EP58DT Features
Supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Adopting a supply type of Dual
2 input lines
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V
MC10EP58DT Applications
There are a lot of ON Semiconductor MC10EP58DT Signal Switches / Multiplexers / Decoders applications.
- Speed synchronization of multiple motors in industries
- To select different devices in microprocessor input
- Data-routing applications
- Logic circuits
- Data transfer
- Telephone network
- CPU memory location identification
- GLAN
- Automatic Monitoring systems
- War field flying robot with a night vision flying camera
