MC10EP58DTG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 10EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | Multiplexer |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | ±3V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP58 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Circuit | 1 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Throw Configuration | DPST |
| Propagation Delay | 410 ps |
| Family | 10E |
| Logic Function | Multiplexer, Mux |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 40mA |
| Number of Input Lines | 2 |
| Voltage Supply Source | Dual Supply |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10EP58DTG Overview
Due to the lack of space on the board, digital switch is provided in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).The package is packaged in the manner of Tube.digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC Multiplexer is used.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of ±3V~5.5V.provides digital controlled switch's digital controlled switch'sMultiplexers of the 10EP series can be used in a wide range of applications.There is a design for terminating 8 as part of its basic configuration.There is a base part number of 10EP58 which can also be used in order to locate the logic switch that are related to this item.In multiplexer's system, 3.3V is the voltage supplied.Signal switch has 8 component pins.Conductors terminate at GULL WING in this design.There is a type of supply Dual that is employed in this case.This multiplexer ic has 8 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.In the 10E family, the logic switch is included.It is recommended that the minimum supply voltage (Vsup) be kept at 3V to avoid some unnecessary failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.The turn signal switch operates with 1 outputs.A RAIL packaging method is used in the switches.It is possible to accept voltage levels by using one of the 2 input lines of multiplexers.In addition, it provides improved features of NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V.
MC10EP58DTG Features
Supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Adopting a supply type of Dual
2 input lines
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V
MC10EP58DTG Applications
There are a lot of ON Semiconductor MC10EP58DTG Signal Switches / Multiplexers / Decoders applications.
- Combinational circuit
- High-performance memory systems
- Memory system of computers
- To select different devices in microprocessor output
- Microprocessor memory systems
- Analog, digital or video signal switching
- CNC machines
- Electronic circuits
- Recording transmission
- Used to connect a single source to multiple destinations
