MC10EP58DTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 10EP |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | Multiplexer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | ±3V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10EP58 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Throw Configuration | SPDT |
| Propagation Delay | 410 ps |
| Family | 10E |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Power Supply Current-Max (ICC) | 40mA |
| Number of Input Lines | 2 |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10EP58DTR2 Overview
As a means of saving space, digital switch is provided in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).The package is in the form of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses an analog IC Multiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.When operated with a ±3V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.The multiplexers from 10EP series can be used for a wide range of applications.This configuration includes 8 terminations as part of its basic functionality.To find signal switch's related components, a base part number of 10EP58 may also be used.The multiplexer's system is powered by 3.3V voltage.A component pin count of 8 can be found on this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, Dual is employed as the supply type.Currently, it is configured with 8 pins.This unit is mounted in the way of Surface Mount.Among the family of 10E the logic switch is a member.It is recommended that the minimum supply voltage (Vsup) be kept at 3V to avoid some unnecessary failures.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.This turn signal switch has 1 outputs designed for its operation.The switches is packaged according to the way of TAPE AND REEL.The multiplexers have 2 input lines used to accept voltage levels.In addition, NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V provides improved characteristics.
MC10EP58DTR2 Features
Supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Adopting a supply type of Dual
2 input lines
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V
MC10EP58DTR2 Applications
There are a lot of ON Semiconductor MC10EP58DTR2 Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Steel plants
- Relay
- Signal router
- Memory system of computers
- Frequency multiplexing system
- Medium scale TV wall
- Night vision cameras
- A robotic vehicle with the metal detector
- Home automation system
