MC10H125MELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10H |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | ECL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10H125 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Power Supplies | 5-5.2V |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 1 |
| Propagation Delay | 3.35 ns |
| Turn On Delay Time | 3.4 ns |
| Logic Function | Translator |
| Output Polarity | TRUE |
| High Level Output Current | -1mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 20mA |
| Negative Supply Voltage-Nom | -5.2V |
| Output Signal | TTL |
| Translator Type | Mixed Signal |
| Input Signal | MECL |
| Output Latch or Register | NONE |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10H125MELG Overview
Embedded in the 16-SOIC (0.209, 5.30mm Width) package, it is now available to you.The package is in the form of Tape & Reel (TR).This output is configured with Non-Inverted.Translator type Mixed Signal is associated with this electrical device.Electronic parts are mounted using the Surface Mount method.This electrical device has channel type Unidirectional.0°C~75°C TA is the operating temperature.In order to achieve its superior flexibility, 1 circuits are used.0 terminations are used to end transmission lines.Parts related to a base part number 10H125 are designated by the same number.This device is powered by a supply voltage of 5V which is applied to it.Level translators has 16 pins.This device belongs to the 10H series.The pin configuration of the device is 16.Electronic parts are designed with a number of bits of 1.Supports a voltage of 5.25V as its maximum supply voltage.There is a minimum supply voltage of 4.75V for it.Level translators has been mounted wLevel translatorsh the method of Surface Mount.4 is the number of channels.This device runs on a 5-5.2V power supply.
MC10H125MELG Features
16-SOIC (0.209, 5.30mm Width) package
1 circuits
16 pin count
10H series
16 pins
5-5.2V power supplies
MC10H125MELG Applications
There are a lot of ON Semiconductor MC10H125MELG voltage translators & level shifters applications.
- One Fabrication Site
- Debouncing a Mechanical Switch
- Extended Product Life Cycle
- ADAS Fusion
- Debouncing a mechanical switch
- Extended Product-Change Notification
- Advanced Driver Assistance System (ADAS)
- Product Traceability
- Personal Electronics
- GPIO
