banner_page

MC10H130FNR2

Latch 4.94V~5.46V 2 Bits Differential Latches 10H Series 10H130 20 Pins QUAD ECL 20-LCC (J-Lead)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC10H130FNR2
  • Package: 20-LCC (J-Lead)
  • Datasheet: PDF
  • Stock: 632
  • Description: Latch 4.94V~5.46V 2 Bits Differential Latches 10H Series 10H130 20 Pins QUAD ECL 20-LCC (J-Lead)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-LCC (J-Lead)
Number of Pins 20
Operating Temperature 0°C~75°C
Packaging Tape & Reel (TR)
Published 2006
Series 10H
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Packing Method TAPE AND REEL
Technology ECL
Voltage - Supply 4.94V~5.46V
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number 10H130
Pin Count 20
Qualification Status Not Qualified
Output Type Differential
Number of Elements 1
Circuit 1:1
Polarity Non-Inverting
Number of Circuits 2
Nominal Supply Current 35mA
Number of Bits 2
Propagation Delay 1.7 ns
Turn On Delay Time 1 ns
Family 10H
Logic Function Latch
Output Characteristics OPEN-EMITTER
Logic Type S-R Latch
Trigger Type LOW LEVEL
High Level Output Current -50mA
Low Level Output Current 32mA
Height Seated (Max) 4.57mm
Length 8.965mm
Width 8.965mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

MC10H130FNR2 Overview


The package in which it is embedded is named 20-LCC (J-Lead). Tape & Reel (TR) is the way it is packaged. Differential is used for the output it is configured with. A S-R Latch logic type is used in this electrical device. According to Surface Mount, this electronic part is mounted. The supply voltage of the device is 4.94V~5.46V. A temperature of 0°C~75°C is set as the operating temperature. An FPGA of this type belongs to the 10H series. Electronic parts with 2 bits are designed for this application. This device is designed with 20 terminations. As a member of the 10H130 family, it falls under that category. The device is equipped with 20 pins. 10H is the family of this electronic device. 20 pins are used in its design. Surface Mount is the way in which this electronic part is mounted. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. In total, it has 1 elements. The superior flexibility of the system is achieved through its use of 2 circuits. In the low level output current, the value is set to 32mA. It is set to zero for the high level output current.

MC10H130FNR2 Features


20-LCC (J-Lead) package
10H series
2 Bits
10H130 family
20 pin count
20 pins
1 elements

MC10H130FNR2 Applications


There are a lot of ON Semiconductor MC10H130FNR2 Latches applications.

  • Decade counting
  • Flip-flops
  • Up/down difference counting
  • Parallel data synchronization
  • Data acquisition
  • Relay replacement
  • General-Purpose Register
  • Multi-line decoders
  • Watches
  • Hammer Device Information

Write a review

Note: HTML is not translated!
    Bad           Good