Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Number of Pins |
16 |
Operating Temperature |
0°C~75°C |
Packaging |
Tube |
Published |
2006 |
Series |
10H |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Terminal Finish |
Tin (Sn) |
Technology |
ECL |
Voltage - Supply |
4.94V~5.46V |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Reach Compliance Code |
unknown |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
10H130 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Output Type |
Differential |
Circuit |
1:1 |
Polarity |
Non-Inverting |
Nominal Supply Current |
35mA |
Number of Bits |
2 |
Propagation Delay |
1.7 ns |
Turn On Delay Time |
1 ns |
Family |
10H |
Logic Function |
Latch |
Output Characteristics |
OPEN-EMITTER |
Logic Type |
S-R Latch |
Prop. Delay@Nom-Sup |
1.9 ns |
Trigger Type |
LOW LEVEL |
High Level Output Current |
-50mA |
Low Level Output Current |
32mA |
Number of Input Lines |
2 |
Height Seated (Max) |
4.44mm |
Length |
19.175mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
MC10H130PG Overview
There is an embedded version of it in package 16-DIP (0.300, 7.62mm). As a result, it has a packaging of Tube. Differential is the output configured for it. The Logic type of this electrical device is S-R Latch. Mounting this electronic component follows the Through Hole method. There is no supply voltage for this device. The operating temperature is 0°C~75°C. The 10H series of FPGAs is the one this FPGA belongs to. There are 2 bits in this electronic part. In this device, there are 16 terminations. As a member of the 10H130 family, it falls under that category. 16 pins are available on it. 10H is the family name of this electronic device. There are 16 pins on it. The electronic part is mounted using the Through Hole method. It consists of 2 input lines from which an electronic circuit can be built. In the low level output current, the value is set to 32mA. The high level output current is set to -50mA.
MC10H130PG Features
16-DIP (0.300, 7.62mm) package
10H series
2 Bits
10H130 family
16 pin count
16 pins
MC10H130PG Applications
There are a lot of ON Semiconductor MC10H130PG Latches applications.
- Data acquisition
- Motor Drives
- Counter control
- Pattern Generators
- Four-bit storage with output enable
- Frequency dividing
- Ring counter
- Timers
- Hammer
- TV Set-top Boxes