MC10H131M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | 10H |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -4.9V~-5.46V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | 10H131 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Clock Frequency | 250MHz |
| Propagation Delay | 1.7 ns |
| Turn On Delay Time | 1 ns |
| Family | 10H |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 56mA |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10H131M Overview
It is packaged in the way of 16-SOIC (0.209, 5.30mm Width). The Tubepackage contains it. T flip flop uses Differentialas the output. JK flip flop uses Positive Edgeas the trigger. It is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of -4.9V~-5.46V. It is operating at a temperature of 0°C~75°C TA. A flip flop of this type is classified as a D-Type. JK flip flop is a part of the 10Hseries of FPGAs. It should not exceed 250MHzin its output frequency. As a result, it consumes 56mA of quiescent current without being affected by external factors. The number of terminations is 16. The object belongs to the 10H131 family. This D flip flop belongs to the family of 10H. It is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. This device has Positive Edgeas its clock edge trigger type. The part you are looking for is included in FF/Latches. The superior flexibility of this circuit is achieved by using 2 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for RAIL. 50mAis set as the high level output current. In the low level output current setting, 50mAis used.
MC10H131M Features
Tube package
10H series
16 pins
MC10H131M Applications
There are a lot of ON Semiconductor MC10H131M Flip Flops applications.
- Bus hold
- Balanced Propagation Delays
- Event Detectors
- Data Synchronizers
- Digital electronics systems
- Common Clocks
- Computing
- Storage Registers
- Shift Registers
- Synchronous counter
