MC10H131MEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 10H |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.9V~-5.46V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | 10H131 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Clock Frequency | 250MHz |
| Propagation Delay | 1.7 ns |
| Turn On Delay Time | 1 ns |
| Family | 10H |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 56mA |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10H131MEL Overview
The flip flop is packaged in a case of 16-SOIC (0.209, 5.30mm Width). D flip flop is embedded in the Tape & Reel (TR) package. The output it is configured with uses Differential. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of -4.9V~-5.46V. A temperature of 0°C~75°C TAis used in the operation. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 10H series. You should not exceed 250MHzin its output frequency. This process consumes 56mA quiescents. A total of 16terminations have been recorded. D latch belongs to the 10H131 family. A device of this type belongs to the family of 10H. This electronic part is mounted in the way of Surface Mount. 16pins are included in its design. There is a clock edge trigger type of Positive Edgeon this device. There is a base part number FF/Latchesfor the RS flip flops. Despite its superior flexibility, it relies on 2 circuits to achieve it. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. A 50mAvalue is set for the high level output current. Low level output current is set to 50mA.
MC10H131MEL Features
Tape & Reel (TR) package
10H series
16 pins
MC10H131MEL Applications
There are a lot of ON Semiconductor MC10H131MEL Flip Flops applications.
- 2 – Bit synchronous counter
- Clock pulse
- Individual Asynchronous Resets
- Synchronous counter
- Instrumentation
- Bounce elimination switch
- Patented noise
- Computers
- Functionally equivalent to the MC10/100EL29
- Common Clocks
