MC10H131MG
| Parameters | |
|---|---|
| Output Type | Differential |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Clock Frequency | 250MHz |
| Propagation Delay | 1.8 ns |
| Turn On Delay Time | 1 ns |
| Family | 10H |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 56mA |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.8542mm |
| Length | 10.4902mm |
| Width | 5.461mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | 10H |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -4.9V~-5.46V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10H131 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
MC10H131MG Overview
As a result, it is packaged as 16-SOIC (0.209, 5.30mm Width). The package Tubecontains it. Differentialis the output configured for it. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of -4.9V~-5.46V. A temperature of 0°C~75°C TAis used in the operation. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 10H series. Its output frequency should not exceed 250MHz. It consumes 56mA of quiescent current without being affected by external factors. It has been determined that there have been 16 terminations. Members of the 10H131family make up this object. This D flip flop belongs to the family of 10H. There is an electronic part mounted in the way of Surface Mount. It is designed with 16 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Due to its superior flexibility, it uses 2 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for RAIL.
MC10H131MG Features
Tube package
10H series
16 pins
MC10H131MG Applications
There are a lot of ON Semiconductor MC10H131MG Flip Flops applications.
- Load Control
- Clock pulse
- Shift registers
- Convert a momentary switch to a toggle switch
- Computers
- Digital electronics systems
- Storage registers
- Individual Asynchronous Resets
- Reduced system switching noise
- Balanced 24 mA output drivers
