MC10H135L
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 10H |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -4.9V~-5.46V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 235 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 10H135 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Clock Frequency | 250MHz |
| Propagation Delay | 2.6 ns |
| Turn On Delay Time | 1 ns |
| Family | 10H |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 68mA |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 75mA |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 5.08mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10H135L Overview
16-CDIP (0.300, 7.62mm)is the way it is packaged. Package Tubeembeds it. T flip flop uses Differentialas the output. It is configured with a trigger that uses Positive Edge. Through Holeis occupied by this electronic component. The JK flip flop operates at a voltage of -4.9V~-5.46V. It is operating at 0°C~75°C TA. It is an electronic flip flop with the type JK Type. In FPGA terms, D flip flop is a type of 10Hseries FPGA. In order for it to function properly, its output frequency should not exceed 250MHz. T flip flop consumes 68mA quiescent energy. A total of 16terminations have been recorded. The 10H135 family contains this object. The electronic device belongs to the 10Hfamily. It is mounted by the way of Through Hole. The electronic flip flop is designed with pins 16. This device has Positive Edgeas its clock edge trigger type. This RS flip flops is a part number FF/Latches. Due to its superior flexibility, it uses 2 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for RAIL. Currently, there are 4 input lines present.
MC10H135L Features
Tube package
10H series
16 pins
MC10H135L Applications
There are a lot of ON Semiconductor MC10H135L Flip Flops applications.
- Buffered Clock
- Power down protection
- Balanced 24 mA output drivers
- ESD performance
- Safety Clamp
- Buffer registers
- Frequency Dividers
- Single Up Count-Control Line
- Counters
- Event Detectors
