MC10H135M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 10H |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -4.9V~-5.46V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | 10H135 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Clock Frequency | 250MHz |
| Propagation Delay | 2.6 ns |
| Turn On Delay Time | 1 ns |
| Family | 10H |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 68mA |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 75mA |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10H135M Overview
The flip flop is packaged in a case of 16-SOIC (0.209, 5.30mm Width). The package Tubecontains it. Differentialis the output configured for it. In the configuration of the trigger, Positive Edgeis used. Surface Mountis occupied by this electronic component. The JK flip flop operates at -4.9V~-5.46Vvolts. A temperature of 0°C~75°C TAis considered to be the operating temperature. JK Typeis the type of this D latch. The FPGA belongs to the 10H series. Its output frequency should not exceed 250MHz Hz. It consumes 68mA of quiescent Currently, there are 16 terminations. The 10H135 family contains this object. A device of this type belongs to the family of 10H. It is mounted in the way of Surface Mount. A total of 16pins are provided on this board. There is a clock edge trigger type of Positive Edgeon this device. It is included in FF/Latches. Using 2 circuits, it is highly flexible. As a result of its reliable performance, this T flip flop is suitable for RAIL. This input has 4lines.
MC10H135M Features
Tube package
10H series
16 pins
MC10H135M Applications
There are a lot of ON Semiconductor MC10H135M Flip Flops applications.
- Latch
- Frequency Dividers
- Cold spare funcion
- ESD performance
- Event Detectors
- Matched Rise and Fall
- Computers
- Load Control
- Frequency division
- Dynamic threshold performance
