MC10H135PG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 10H |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -4.9V~-5.46V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10H135 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Clock Frequency | 250MHz |
| Propagation Delay | 2.6 ns |
| Turn On Delay Time | 1 ns |
| Family | 10H |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 68mA |
| Halogen Free | Halogen Free |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 75mA |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10H135PG Overview
It is embeded in 16-DIP (0.300, 7.62mm) case. Package Tubeembeds it. In the configuration, Differentialis used as the output. There is a trigger configured with Positive Edge. Through Holemounts this electrical part. The JK flip flop operates at a voltage of -4.9V~-5.46V. In this case, the operating temperature is 0°C~75°C TA. It is an electronic flip flop with the type JK Type. This type of FPGA is a part of the 10H series. It should not exceed 250MHzin its output frequency. As a result, it consumes 68mA of quiescent current without being affected by external factors. Terminations are 16. The 10H135 family contains this object. In terms of electronic devices, this device belongs to the 10Hfamily of devices. It is mounted by the way of Through Hole. A total of 16pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. The part is included in FF/Latches. To achieve this superior flexibility, 2 circuits are used. On the basis of its reliable performance, this D flip flop is well suited for use with RAIL. There are 4 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. 50mAis set as the high level output current. 50mAis set as the low level output current.
MC10H135PG Features
Tube package
10H series
16 pins
MC10H135PG Applications
There are a lot of ON Semiconductor MC10H135PG Flip Flops applications.
- Buffered Clock
- Safety Clamp
- ESD protection
- Latch
- Data Synchronizers
- Dynamic threshold performance
- ESD performance
- Computing
- Cold spare funcion
- Data transfer
