MC10H175L
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~75°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 10H |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | 4.94V~5.46V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 10H175 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 5:5 |
| Polarity | Non-Inverting |
| Nominal Supply Current | 97mA |
| Number of Bits | 5 |
| Propagation Delay | 1.6 ns |
| Turn On Delay Time | 1 ns |
| Family | 10H |
| Logic Function | D-Type, Latch |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 2.4 ns |
| Trigger Type | LOW LEVEL |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Number of Input Lines | 5 |
| Independent Circuits | 1 |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10H175L Overview
In the 16-CDIP (0.300, 7.62mm) package, it is embedded. Tube is the way in which it is packaged. In its configuration, Tri-State is used as the output. This electrical device has Logic type D-Type Transparent Latch. Electronic parts are mounted in accordance with Through Hole. There is no supply voltage for this device. During operation, the temperature is set at 0°C~75°C. An FPGA in this series belongs to the 10H family. The design of this electronic part is based on 5 bits. As far as this device is concerned, it has no terminations. The family it belongs to is 10H175. 16 pins are available on it. There is a device in this electronic family called 10H. The device has 16 pins. Electronic parts are mounted using the Through Hole method. This part can be found within the FF/Latches subcategory. An electronic circuit can be found on 5 input lines. On the basis of its reliability, this device is well suited for RAIL. There is 50mA output current at the low level. The high level output current is set to 50mA.
MC10H175L Features
16-CDIP (0.300, 7.62mm) package
10H series
5 Bits
10H175 family
16 pin count
16 pins
MC10H175L Applications
There are a lot of ON Semiconductor MC10H175L Latches applications.
- Sample and hold register
- Instrumentation
- Buffer/Storage Registers
- Storage
- Frequency dividing
- Decade counting 7-segment decimal display
- Parallel Input
- Automotive ADAS
- OC-48 communication systems
- Stacked or Push-Down Registers
