MC10H176L
| Parameters | |
|---|---|
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 10H |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -4.9V~-5.46V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 235 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 10H176 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Number of Bits | 6 |
| Clock Frequency | 250MHz |
| Propagation Delay | 2.2 ns |
| Turn On Delay Time | 1 ns |
| Family | 10H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 112mA |
| Output Characteristics | OPEN-EMITTER |
| Trigger Type | Positive Edge |
| Number of Output Lines | 6 |
| fmax-Min | 250 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 250000000Hz |
| Height Seated (Max) | 5.08mm |
| RoHS Status | Non-RoHS Compliant |
MC10H176L Overview
The flip flop is packaged in a case of 16-CDIP (0.300, 7.62mm). As part of the package Tube, it is embedded. T flip flop is configured with an output of Non-Inverted. In the configuration of the trigger, Positive Edgeis used. Through Holeis in the way of this electric part. The JK flip flop operates at a voltage of -4.9V~-5.46V. The operating temperature is 0°C~75°C TA. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 10H series. This D flip flop should not have a frequency greater than 250MHz. A total of 1 elements are present. It consumes 112mA of quiescent current without being affected by external factors. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Members of the 10H176family make up this object. 10His the family of this D flip flop. This electronic part is mounted in the way of Through Hole. This board is designed with 16pins on it. This device has Positive Edgeas its clock edge trigger type. It is part of the FF/Latchesbase part number family. 6bits are used in its design. The superior flexibility of this circuit is achieved by using 7 circuits. A reliable performance of this D flip flop makes it well suited for use in RAIL. In order to operate, the chip has 6 output lines.
MC10H176L Features
Tube package
10H series
16 pins
6 Bits
MC10H176L Applications
There are a lot of ON Semiconductor MC10H176L Flip Flops applications.
- Consumer
- Control circuits
- Balanced Propagation Delays
- Pattern generators
- Load Control
- Matched Rise and Fall
- Memory
- Automotive
- Synchronous counter
- Safety Clamp
