MC10H176MEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10H |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.9V~-5.46V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | 10H176 |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Number of Bits | 6 |
| Clock Frequency | 250MHz |
| Propagation Delay | 2.2 ns |
| Turn On Delay Time | 1 ns |
| Family | 10H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 112mA |
| Trigger Type | Positive Edge |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Number of Output Lines | 6 |
| fmax-Min | 250 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 250000000Hz |
| Height Seated (Max) | 2.05mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10H176MEL Overview
In the form of 16-SOIC (0.209, 5.30mm Width), it has been packaged. It is included in the package Tape & Reel (TR). T flip flop uses Non-Invertedas the output. It is configured with a trigger that uses Positive Edge. Surface Mountis occupied by this electronic component. With a supply voltage of -4.9V~-5.46V volts, it operates. In this case, the operating temperature is 0°C~75°C TA. This logic flip flop is classified as type D-Type. The FPGA belongs to the 10H series. This D flip flop should not have a frequency greater than 250MHz. A total of 1elements are contained within it. As a result, it consumes 112mA quiescent current and is not affected by external forces. The number of terminations is 16. Members of the 10H176family make up this object. It is a member of the 10Hfamily of D flip flop. Surface Mount mounts this electronic component. With its 16pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part designed with 6bits is used in this application. The superior flexibility of this circuit is achieved by using 7 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. There are 6 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. A -50mAis set for the high level output current. 50mA is the low level output current.
MC10H176MEL Features
Tape & Reel (TR) package
10H series
16 pins
6 Bits
MC10H176MEL Applications
There are a lot of ON Semiconductor MC10H176MEL Flip Flops applications.
- Differential Individual
- Individual Asynchronous Resets
- EMI reduction circuitry
- Control circuits
- Counters
- Digital electronics systems
- Safety Clamp
- Divide a clock signal by 2 or 4
- Power down protection
- Memory
