MC10H176P
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 10H |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -4.9V~-5.46V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 10H176 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Number of Bits | 6 |
| Clock Frequency | 250MHz |
| Propagation Delay | 2.2 ns |
| Turn On Delay Time | 1 ns |
| Family | 10H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 112mA |
| Output Characteristics | OPEN-EMITTER |
| Trigger Type | Positive Edge |
| Number of Output Lines | 6 |
| fmax-Min | 250 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 250000000Hz |
| Height Seated (Max) | 4.44mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10H176P Overview
In the form of 16-DIP (0.300, 7.62mm), it has been packaged. The Tubepackage contains it. The output it is configured with uses Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Through Holeis occupied by this electronic component. With a supply voltage of -4.9V~-5.46V volts, it operates. Currently, the operating temperature is 0°C~75°C TA. D-Typedescribes this flip flop. The 10Hseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 250MHz. A total of 1 elements are present. There is a consumption of 112mAof quiescent energy. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. D latch belongs to the 10H176 family. In terms of electronic devices, this device belongs to the 10Hfamily of devices. It is mounted in the way of Through Hole. This board has 16 pins. This device has Positive Edgeas its clock edge trigger type. It is included in FF/Latches. An electronic part with 6bits has been designed. Despite its superior flexibility, it relies on 7 circuits to achieve it. On the basis of its reliable performance, this D flip flop is well suited for use with RAIL. In order for the chip to function, it has 6output lines.
MC10H176P Features
Tube package
10H series
16 pins
6 Bits
MC10H176P Applications
There are a lot of ON Semiconductor MC10H176P Flip Flops applications.
- Clock pulse
- Computing
- Consumer
- Shift registers
- Data storage
- Event Detectors
- Circuit Design
- EMI reduction circuitry
- CMOS Process
- Bus hold
