MC10H176PG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 10H |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -4.9V~-5.46V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10H176 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Number of Bits | 6 |
| Clock Frequency | 250MHz |
| Propagation Delay | 2.2 ns |
| Turn On Delay Time | 1 ns |
| Family | 10H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 112mA |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Trigger Type | Positive Edge |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Number of Output Lines | 6 |
| fmax-Min | 250 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 250000000Hz |
| Height Seated (Max) | 4.44mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10H176PG Overview
16-DIP (0.300, 7.62mm)is the way it is packaged. There is an embedded version in the package Tube. T flip flop is configured with an output of Non-Inverted. Positive Edgeis the trigger it is configured with. Through Holeis occupied by this electronic component. The supply voltage is set to -4.9V~-5.46V. The operating temperature is 0°C~75°C TA. The type of this D latch is D-Type. In this case, it is a type of FPGA belonging to the 10H series. Its output frequency should not exceed 250MHz. A total of 1elements are present in it. This process consumes 112mA quiescents. Currently, there are 16 terminations. This D latch belongs to the family of 10H176. The electronic device belongs to the 10Hfamily. There is an electronic part that is mounted in the way of Through Hole. This board is designed with 16pins on it. In this device, the clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part designed with 6bits is used in this application. Due to its superior flexibility, it uses 7 circuits. This D flip flop is well suited for RAIL based on its reliable performance. It operates with 6 output lines. 50mAis the output current at high level. There is no low level output current set at 50mA.
MC10H176PG Features
Tube package
10H series
16 pins
6 Bits
MC10H176PG Applications
There are a lot of ON Semiconductor MC10H176PG Flip Flops applications.
- ESD performance
- Frequency division
- Communications
- Buffered Clock
- QML qualified product
- Modulo – n – counter
- Reduced system switching noise
- Memory
- Matched Rise and Fall
- Count Modes
