MC10H186FNG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 10H |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | ECL |
| Voltage - Supply | -4.9V~-5.46V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10H186 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Number of Bits | 6 |
| Clock Frequency | 250MHz |
| Propagation Delay | 3 ns |
| Turn On Delay Time | 1 ns |
| Family | 10H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 110mA |
| Output Characteristics | OPEN-EMITTER |
| Trigger Type | Positive Edge |
| Number of Output Lines | 6 |
| fmax-Min | 250 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 250000000Hz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10H186FNG Overview
The package is in the form of 20-LCC (J-Lead). You can find it in the Tubepackage. Non-Invertedis the output configured for it. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. A supply voltage of -4.9V~-5.46V is required for operation. A temperature of 0°C~75°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. In this case, it is a type of FPGA belonging to the 10H series. It should not exceed 250MHzin terms of its output frequency. D latch consists of 1 elements. As a result, it consumes 110mA of quiescent current without being affected by external factors. Terminations are 20. The 10H186 family contains this object. This D flip flop belongs to the family of 10H. In this case, the electronic component is mounted in the way of Surface Mount. It is designed with 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is included in FF/Latches. This flip flop is designed with 6 Bits. Its superior flexibility is attributed to its use of 7 circuits. The JK flip flop is with 6 output lines to operate.
MC10H186FNG Features
Tube package
10H series
20 pins
6 Bits
MC10H186FNG Applications
There are a lot of ON Semiconductor MC10H186FNG Flip Flops applications.
- Balanced 24 mA output drivers
- Frequency Divider circuits
- Digital electronics systems
- Pattern generators
- Bounce elimination switch
- Computers
- Load Control
- Parallel data storage
- Bus hold
- Control circuits
