MC10H186P
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 10H |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Subcategory | FF/Latches |
| Technology | ECL |
| Voltage - Supply | -4.9V~-5.46V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10H186 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Number of Bits | 6 |
| Clock Frequency | 250MHz |
| Propagation Delay | 3 ns |
| Turn On Delay Time | 1 ns |
| Family | 10H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 110mA |
| Output Characteristics | OPEN-EMITTER |
| Trigger Type | Positive Edge |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Number of Output Lines | 6 |
| fmax-Min | 250 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 250000000Hz |
| Height Seated (Max) | 4.44mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10H186P Overview
The item is packaged in 16-DIP (0.300, 7.62mm)cases. Package Tubeembeds it. In the configuration, Non-Invertedis used as the output. It is configured with the trigger Positive Edge. Through Holemounts this electrical part. The JK flip flop operates at -4.9V~-5.46Vvolts. It is at 0°C~75°C TAdegrees Celsius that the system is operating. Logic flip flops of this type are classified as D-Type. In FPGA terms, D flip flop is a type of 10Hseries FPGA. Its output frequency should not exceed 250MHz. There are 1 elements in it. There is 110mA quiescent consumption. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 10H186 family contains it. In this case, the D flip flop belongs to the 10Hfamily. Electronic part Through Holeis mounted in the way. With its 16pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. An electronic part designed with 6bits is used in this application. 7 circuits are used to achieve its superior flexibility. There are no output lines on the JK flip flop. It is set to 50mAfor the high level output current. There is no low level output current set at 50mA.
MC10H186P Features
Tube package
10H series
16 pins
6 Bits
MC10H186P Applications
There are a lot of ON Semiconductor MC10H186P Flip Flops applications.
- Counters
- Differential Individual
- Single Up Count-Control Line
- Registers
- Patented noise
- Guaranteed simultaneous switching noise level
- Asynchronous counter
- Set-reset capability
- Computers
- Data storage
