MC10H600FN
| Parameters | |
|---|---|
| Base Part Number | 10H600 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Power Supplies | 5-5.2V |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 1 |
| Propagation Delay | 3.2 ns |
| Turn On Delay Time | 3.2 ns |
| Logic Function | Translator |
| Output Characteristics | OPEN-EMITTER |
| Output Polarity | TRUE |
| Channel Type | Unidirectional |
| Negative Supply Voltage-Nom | -5.2V |
| Output Signal | ECL |
| Translator Type | Mixed Signal |
| Input Signal | TTL |
| Channels per Circuit | 9 |
| Output Latch or Register | NONE |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 10H |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 9 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
MC10H600FN Overview
In the package 28-LCC (J-Lead), it can be found.Tube is the way it is packaged.This output is configured with Non-Inverted.Level translators is the Mixed Signal type of translator that is used in this electrical device.A Surface Mount mounting method has been used for this electronic part.Unidirectional is the type of channel for this electrical device.0°C~75°C TA is the operating temperature.The circuit's superior flexibility is achieved through the use of 1 circuits.As part of the transmission line termination process, there are a total of 28 terminations.A base part number 10H600 indicates the related parts.In order to power the device, a voltage supply of 5V is required.With 28 pins, it is equipped with a minimal number of connections.This is a device from the 10H series.The board has 28 pins.An electronic part with 1 bits is designed.Voltages up to 5.5V can be supplied.In order for the machine to operate, the supply voltage must be 4.5V.Power comes from a 5-5.2V supply.
MC10H600FN Features
28-LCC (J-Lead) package
1 circuits
28 pin count
10H series
28 pins
5-5.2V power supplies
MC10H600FN Applications
There are a lot of ON Semiconductor MC10H600FN voltage translators & level shifters applications.
- Telecom
- Driving Indicator LEDs or Buzzers
- One Fabrication Site
- Product Traceability
- Extended Product-Change Notification
- Controlled Baseline
- Data and Clock Transmission Over Backplane
- Infotainment Head Unit
- Test Site
- Signaling Level Conversion for Clock or Data
