MC10XS3412JHFK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerQFN |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tray |
| Published | 2007 |
| Feature | Internal PWM, Slew Rate Controlled, Watchdog Timer |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | S-XBCC-B16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 20V |
| Power Supplies | 3.3/56/20V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | SPI |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~20V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 95 µs |
| Rds On (Typ) | 10m Ω, 12m Ω |
| Turn Off Time | 95 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.2mm |
| Length | 12mm |
| Width | 12mm |
| RoHS Status | ROHS3 Compliant |
MC10XS3412JHFK Overview
Tray is how it's packaged.There is a package for it in the 24-PowerQFN package.This LED driving board is mounted using the mounting type Surface Mount.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.By default, it is set to output 4.The LED driving board operates with a supply voltage of 3V~5.5V.Voltage output is N-Channel volts at maximum.Internal PWM, Slew Rate Controlled, Watchdog Timer features are available on the lighting driver.As a result, there are 16 terminations.It contains 4 functions.High efficiency is possible when the supply voltage is set to 12V.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The maximum supply voltage for this LED driver is 20V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 6V.A 3.3/56/20V power supply is used by the part.
MC10XS3412JHFK Features
Supplied from 12V
MC10XS3412JHFK Applications
There are a lot of NXP USA Inc. MC10XS3412JHFK Power Switches ICs applications.
- Gaming
- Solid State Drivers
- Portable Music Players
- Various applications equipped with buttons
- Portable GPS
- Telecom and Network Systems
- HDD, SSD
- Smart Phones, Feature Phones
- HDD and SSD
- Smartphone and PDA
