MC10XS3435BHFK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerQFN |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tray |
| Published | 2014 |
| Feature | Internal PWM, Slew Rate Controlled, Watchdog Timer |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 4 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC10XS3435 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 20V |
| Power Supplies | 3.3/56/20V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | SPI |
| Current - Output (Max) | 6A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~20V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 95 μs |
| Rds On (Typ) | 10m Ω (Max), 35m Ω (Max) |
| Turn Off Time | 95 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.2mm |
| Length | 12mm |
| Width | 12mm |
| RoHS Status | ROHS3 Compliant |
MC10XS3435BHFK Overview
It is packaged in the form of a Tray.The 24-PowerQFN package includes it.It has been mounted as Surface Mount on the LED driver.There is a General Purpose switch type associated with it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The lighting driver has a total of 4 outputs that are available for use.Operation is based on a supply voltage of 3V~5.5V.It produces a maximum output voltage of N-Channel volts at its maximum output.There are Internal PWM, Slew Rate Controlled, Watchdog Timer features available on the LED driving board.As you can see, it comes from the MC10XS3435 family.It consists of 24 terminations in total.Currently, there are 4 functions associated with the lighting driver.There is a maximum output of 6AV from the LED driver.As long as the supply voltage is 12V, high efficiency can be achieved.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.This LED driver is configured to have a maximum supply voltage of 20V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 6V.There is a voltage supply of 3.3/56/20V volts on this part.
MC10XS3435BHFK Features
Supplied from 12V
MC10XS3435BHFK Applications
There are a lot of NXP USA Inc. MC10XS3435BHFK Power Switches ICs applications.
- Set-Top Boxes
- Smartphone and PDA
- Portable GPS Device
- Various applications equipped with buttons
- Wireless Headsets
- Storage (HDDs, SSDs)
- Notebook and Tablet Computers
- Hot Swap
- Portable GPS
- Storage Drives
