MC10XS3435DHFK
| Parameters | |
|---|---|
| Height Seated (Max) | 2.2mm |
| Length | 12mm |
| Width | 12mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerQFN |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tray |
| Published | 2014 |
| Feature | Internal PWM, Slew Rate Controlled, Watchdog Timer |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC10XS3435 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 20V |
| Power Supplies | 3.3/56/20V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | SPI |
| Current - Output (Max) | 6A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~20V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 95 μs |
| Rds On (Typ) | 10m Ω (Max), 35m Ω (Max) |
| Turn Off Time | 95 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
MC10XS3435DHFK Overview
It is packaged in the manner of a Tray.Package 24-PowerQFN contains it.The lighting driver is mounted in the Surface Mount position.There is a switch type of General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has 4 outputs.Operation is based on 3V~5.5V supply voltage.A maximum output voltage of N-Channel volts has been specified.A lighting driver with Internal PWM, Slew Rate Controlled, Watchdog Timer features is available.There is a MC10XS3435 family of things that it belongs to.A total of 24 terminations have been found in it.As far as the lighting driver is concerned, there are 4 functions.The maximum output of the LED driving board is 6AV.High efficiency is possible at 12V supply voltage.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In this case, Vsup (maximum supply voltage) is set to 20V.In order to operate normally, the supply voltage (Vsup) must be maintained above 6V.There is a voltage supply of 3.3/56/20V volts on this part.
MC10XS3435DHFK Features
Supplied from 12V
MC10XS3435DHFK Applications
There are a lot of NXP USA Inc. MC10XS3435DHFK Power Switches ICs applications.
- Various applications equipped with buttons
- USB3.1 Power Delivery
- Portable/Handheld Devices
- Gaming
- Hot Swap
- Portable Devices
- Handheld Devices
- USB Ports/Hubs
- USB Power Distribution
- Portable GPS Device
