banner_page

MC10XS3435DHFKR2

3.3/56/20V N-Channel PMIC MC10XS3435 12V 24-PowerQFN


  • Manufacturer: NXP USA Inc.
  • Nocochips NO: 568-MC10XS3435DHFKR2
  • Package: 24-PowerQFN
  • Datasheet: -
  • Stock: 340
  • Description: 3.3/56/20V N-Channel PMIC MC10XS3435 12V 24-PowerQFN (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 24-PowerQFN
Surface Mount YES
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Published 2014
Feature Internal PWM, Slew Rate Controlled, Watchdog Timer
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 24
ECCN Code EAR99
Subcategory Peripheral Drivers
Technology CMOS
Terminal Position BOTTOM
Terminal Form BUTT
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 12V
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MC10XS3435
Number of Outputs 4
Qualification Status Not Qualified
Output Type N-Channel
Supply Voltage-Max (Vsup) 20V
Power Supplies 3.3/56/20V
Supply Voltage-Min (Vsup) 6V
Interface SPI
Current - Output (Max) 6A
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) 3V~5.5V
Switch Type General Purpose
Ratio - Input:Output 1:1
Voltage - Load 6V~20V
Driver Number of Bits 4
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Turn On Time 95 μs
Rds On (Typ) 10m Ω (Max), 35m Ω (Max)
Turn Off Time 95 μs
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Output Current Flow Direction SINK
Height Seated (Max) 2.2mm
Length 12mm
Width 12mm
RoHS Status ROHS3 Compliant

MC10XS3435DHFKR2 Overview


As you can see, it's packaged in the way of a Tape & Reel (TR).The 24-PowerQFN package contains it.The lighting driver has the mounting type Surface Mount.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.As a default, the output is set to 4.It uses a supply voltage of 3V~5.5V to operate.It has a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Internal PWM, Slew Rate Controlled, Watchdog Timer.It belongs to the MC10XS3435 family.A total of 24 terminations can be found in it.Currently, there are 4 functions associated with the lighting driver.In terms of output, the lighting driver can provide a maximum of 6A V.With a supply voltage of 12V, high efficiency is possible.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this LED driver is 20V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 6V.The power supply of the part is 3.3/56/20V.

MC10XS3435DHFKR2 Features


Supplied from 12V

MC10XS3435DHFKR2 Applications


There are a lot of NXP USA Inc. MC10XS3435DHFKR2 Power Switches ICs applications.

  • HDD and SSD
  • Solid State Drivers
  • Telecom and Network Systems
  • Smartphone and PDA
  • Notebook PC
  • USB Power Distribution
  • Portable GPS
  • Portable GPS Device
  • Hot Swap
  • Solid-State Drives

Write a review

Note: HTML is not translated!
    Bad           Good