MC12093MNR4G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Weight | 37.393021mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Prescaler |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Additional Feature | SELECTABLE DIVISION RATIO 4 AVAILABLE |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 1.1GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC12093 |
| Output | ECL |
| Pin Count | 8 |
| Output Voltage | 800mV |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 1 |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 4.5mA |
| Family | ECL |
| Halogen Free | Halogen Free |
| Input | CML, ECL |
| Ratio - Input:Output | 1:1 |
| Differential - Input:Output | Yes/No |
| Nominal Output Voltage | 800mV |
| Height | 950μm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC12093MNR4G Overview
It is packaged using the Tape & Reel (TR) method since it is a clock IC. The 8-VFDFN Exposed Pad package embeds this Clock PLL. This clock generator ic can sustain a maximum temperature of 260 during reflowing. There are 8 terminations found in this file. The input of this clock generator is designed to be CML, ECL. For full access to the electronic component's capabilities, 1 circuits are implemented. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. For safety reasons, this frequency synthesizer should have a voltage supply above 2.7V. There should be 2.7V~5.5V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. ECL is designed for clock generator's output. It has been classified as a Prescaler electronic part, which means that it is a semiconductor. There is a 8-bit clock-generating IC built specifically for microprocessors in this frequency generator. Related electrical parts can be found for the base part number MC12093. There is a 8 pin that is available on the digital clock generator. Clock PLL is capable of handling a voltage of 5V. SELECTABLE DIVISION RATIO 4 AVAILABLE is included in this frequency generator to enhance clock signal output. When searching for parts of the ECL family, similar frequency generators will be found. At 1.1GHz, frequency synthesizer achieves high efficiency. For the clock time generator to function properly, 3mA of supply current must be provided.
MC12093MNR4G Features
Available in the 8-VFDFN Exposed Pad
Operating supply voltage of 5V
MC12093MNR4G Applications
There are a lot of ON Semiconductor MC12093MNR4G Clock Generators applications.
- Telecommunication systems
- Fiber Channel
- Automatic control system test
- Pagers
- Small signal recovery
- Clock recovery
- Digital circuits
- High-frequency induction heating
- Cell phones
- Satellite receivers
