MC14013BCPG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 4.535924g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Current Rating | 2.25μA |
| Base Part Number | 4013 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Voltage | 18V |
| Load Capacitance | 50pF |
| Output Current | 8.8mA |
| Clock Frequency | 14MHz |
| Propagation Delay | 450 ns |
| Turn On Delay Time | 50 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8.8mA 8.8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 100ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| fmax-Min | 7 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 3.68mm |
| Length | 19.56mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC14013BCPG Overview
The item is packaged in 14-DIP (0.300, 7.62mm)cases. Package Tubeembeds it. In the configuration, Differentialis used as the output. JK flip flop uses Positive Edgeas the trigger. There is an electrical part that is mounted in the way of Through Hole. A supply voltage of 3V~18V is required for operation. A temperature of -55°C~125°C TAis considered to be the operating temperature. The type of this D latch is D-Type. In terms of FPGAs, it belongs to the 4000B series. It should not exceed 14MHzin its output frequency. This process consumes 4μA quiescents. There are 14 terminations,If you search by 4013, you will find similar parts. A voltage of 5V is used as the power supply for this D latch. JK flip flop input capacitance is 5pF farads. Electronic part Through Holeis mounted in the way. This board has 14 pins. This device has Positive Edgeas its clock edge trigger type. There is a FF/Latchesbase part number assigned to the RS flip flops. In view of its reliability, this D flip flop is a good fit for RAIL. As a result of its output current of 8.8mA, it is very flexible in terms of design. There are no output lines on the JK flip flop. There are 2 channels available.
MC14013BCPG Features
Tube package
4000B series
14 pins
MC14013BCPG Applications
There are a lot of ON Semiconductor MC14013BCPG Flip Flops applications.
- High Performance Logic for test systems
- Memory
- Computers
- Latch-up performance
- Asynchronous counter
- Matched Rise and Fall
- Single Up Count-Control Line
- Storage Registers
- Control circuits
- Frequency Divider circuits
