MC14013BDG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 4013 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 8.8mA |
| Clock Frequency | 14MHz |
| Propagation Delay | 50 ns |
| Turn On Delay Time | 50 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Number of Inputs | 1 |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8.8mA 8.8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 100ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 7 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Min Supply Voltage (DC) | 3V |
| Ambient Temperature Range High | 125°C |
| Height | 1.75mm |
| Length | 8.7376mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC14013BDG Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. It is contained within the Tubepackage. As configured, the output uses Differential. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 3V~18V. A temperature of -55°C~125°C TAis considered to be the operating temperature. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 4000B series. A frequency of 14MHzshould not be exceeded by its output. Despite external influences, it consumes 4μAof quiescent current. 14terminations have occurred. The object belongs to the 4013 family. The power source is powered by 5V. A 5pFfarad input capacitance is provided by this T flip flop. It is mounted in the way of Surface Mount. The 14pins are designed into the board. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. Using 2 circuits, it is highly flexible. A reliable performance of this D flip flop makes it well suited for use in RAIL. Its output current of 8.8mAallows for maximum design flexibility. D flip flop includes 1 inpits.
MC14013BDG Features
Tube package
4000B series
14 pins
MC14013BDG Applications
There are a lot of ON Semiconductor MC14013BDG Flip Flops applications.
- Clock pulse
- 2 – Bit synchronous counter
- Communications
- Modulo – n – counter
- Single Down Count-Control Line
- Frequency Dividers
- Computers
- Load Control
- ESCC
- Data transfer
