MC14013BDR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Function | Set(Preset) and Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Min (Vsup) | 3V |
| Clock Frequency | 14MHz |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 350 ns |
| fmax-Min | 7 MHz |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
MC14013BDR2 Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. There is an embedded version in the package Tape & Reel (TR). In the configuration, Differentialis used as the output. There is a trigger configured with Positive Edge. This electronic part is mounted in the way of Surface Mount. Powered by a 3V~18Vvolt supply, it operates as follows. A temperature of -55°C~125°C TAis considered to be the operating temperature. D-Typedescribes this flip flop. It belongs to the 4000Bseries of FPGAs. Its output frequency should not exceed 14MHz Hz. The element count is 2 . A total of 14terminations have been recorded. Power is provided by a 5V supply. A normal operating voltage (Vsup) should remain above 3V.
MC14013BDR2 Features
Tape & Reel (TR) package
4000B series
MC14013BDR2 Applications
There are a lot of Rochester Electronics, LLC MC14013BDR2 Flip Flops applications.
- Balanced 24 mA output drivers
- Guaranteed simultaneous switching noise level
- Asynchronous counter
- Buffered Clock
- Shift Registers
- Synchronous counter
- High Performance Logic for test systems
- EMI reduction circuitry
- Count Modes
- Common Clocks
