MC14013BDTR2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 4013 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Clock Frequency | 14MHz |
| Propagation Delay | 350 ns |
| Turn On Delay Time | 50 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8.8mA 8.8mA |
| Max Propagation Delay @ V, Max CL | 100ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 1 |
| fmax-Min | 7 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC14013BDTR2 Overview
14-TSSOP (0.173, 4.40mm Width)is the way it is packaged. You can find it in the Tape & Reel (TR)package. Differentialis the output configured for it. This trigger uses the value Positive Edge. This electronic part is mounted in the way of Surface Mount. A 3V~18Vsupply voltage is required for it to operate. It is at -55°C~125°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. The 4000Bseries comprises this type of FPGA. Its output frequency should not exceed 14MHz Hz. The element count is 2 . It consumes 4μA of quiescent current without being affected by external factors. 14terminations have occurred. You can search similar parts based on 4013. It is powered from a supply voltage of 5V. The input capacitance of this JK flip flopis 5pF farads. It is mounted in the way of Surface Mount. As you can see from the design, it has pins with 14. In this device, the clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. 1bits are used in its design. For normal operation, the supply voltage (Vsup) should be kept above 3V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. It has 1lines.
MC14013BDTR2 Features
Tape & Reel (TR) package
4000B series
14 pins
1 Bits
MC14013BDTR2 Applications
There are a lot of ON Semiconductor MC14013BDTR2 Flip Flops applications.
- Circuit Design
- Test & Measurement
- Digital electronics systems
- Storage registers
- Counters
- Pattern generators
- Consumer
- CMOS Process
- EMI reduction circuitry
- ESD protection
