MC14013BF
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Function | Set(Preset) and Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Min (Vsup) | 3V |
| Clock Frequency | 14MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8.8mA 8.8mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 100ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Propagation Delay (tpd) | 350 ns |
| fmax-Min | 7 MHz |
| RoHS Status | ROHS3 Compliant |
MC14013BF Overview
The package is in the form of 14-SOIC (0.209, 5.30mm Width). You can find it in the Tubepackage. T flip flop uses Differentialas the output. It is configured with the trigger Positive Edge. Surface Mountis occupied by this electronic component. Powered by a 3V~18Vvolt supply, it operates as follows. The operating temperature is -55°C~125°C TA. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 4000Bseries contain this type of chip. You should not exceed 14MHzin the output frequency of the device. The list contains 2 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. An input voltage of 5Vpowers the D latch. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. The supply voltage (Vsup) should be kept above 3V for normal operation.
MC14013BF Features
Tube package
4000B series
MC14013BF Applications
There are a lot of Rochester Electronics, LLC MC14013BF Flip Flops applications.
- Event Detectors
- Modulo – n – counter
- Registers
- Balanced 24 mA output drivers
- Functionally equivalent to the MC10/100EL29
- Supports Live Insertion
- Synchronous counter
- Common Clocks
- Buffer registers
- Data Synchronizers
