MC14013BF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 4013 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Clock Frequency | 14MHz |
| Propagation Delay | 350 ns |
| Turn On Delay Time | 50 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8.8mA 8.8mA |
| Max Propagation Delay @ V, Max CL | 100ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| fmax-Min | 7 MHz |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC14013BF Overview
The flip flop is packaged in a case of 14-SOIC (0.209, 5.30mm Width). The package Tubecontains it. It is configured with Differentialas an output. This trigger is configured to use Positive Edge. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 3V~18V. Currently, the operating temperature is -55°C~125°C TA. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 4000Bseries FPGA. You should not exceed 14MHzin the output frequency of the device. In total, it contains 2 elements. There is 4μA quiescent consumption. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. You can search similar parts based on 4013. A voltage of 5V provides power to the D latch. This T flip flop has a capacitance of 5pF farads at the input. This electronic part is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. An electronic part designed with 1bits is used in this application. Normal operation requires a supply voltage (Vsup) above 3V. Considering the reliability of this T flip flop, it is well suited for RAIL. It operates with 1 output lines.
MC14013BF Features
Tube package
4000B series
14 pins
1 Bits
MC14013BF Applications
There are a lot of ON Semiconductor MC14013BF Flip Flops applications.
- Patented noise
- Test & Measurement
- Consumer
- Buffered Clock
- Divide a clock signal by 2 or 4
- Load Control
- Single Up Count-Control Line
- Cold spare funcion
- Automotive
- Supports Live Insertion
