MC14013BFG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 4013 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 14MHz |
| Propagation Delay | 350 ns |
| Turn On Delay Time | 50 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8.8mA 8.8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 100ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| fmax-Min | 7 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC14013BFG Overview
The flip flop is packaged in 14-SOIC (0.209, 5.30mm Width). It is contained within the Tubepackage. In the configuration, Differentialis used as the output. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 3V~18Vis used as the supply voltage. It is operating at a temperature of -55°C~125°C TA. The type of this D latch is D-Type. The FPGA belongs to the 4000B series. It should not exceed 14MHzin terms of its output frequency. T flip flop consumes 4μA quiescent energy. A total of 14 terminations have been made. If you search by 4013, you will find similar parts. It is powered from a supply voltage of 5V. Its input capacitance is 5pFfarads. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 14. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. Normally, the supply voltage (Vsup) should be kept above 3V. 2 circuits are used to achieve its superior flexibility. In light of its reliable performance, this T flip flop is well suited for RAIL. There are no output lines on the JK flip flop.
MC14013BFG Features
Tube package
4000B series
14 pins
MC14013BFG Applications
There are a lot of ON Semiconductor MC14013BFG Flip Flops applications.
- 2 – Bit synchronous counter
- Storage registers
- Buffer registers
- Registers
- Functionally equivalent to the MC10/100EL29
- Differential Individual
- Event Detectors
- Patented noise
- Counters
- Shift Registers
