Parameters |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Mounting Type |
Through Hole |
Package / Case |
14-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
14 |
Weight |
4.535924g |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
Resistance |
400Ohm |
Terminal Finish |
Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC14016B |
Output |
SEPARATE OUTPUT |
Pin Count |
14 |
Operating Supply Voltage |
15V |
Number of Channels |
1 |
Max Supply Voltage |
18V |
Min Supply Voltage |
3V |
Power Dissipation |
500mW |
Throw Configuration |
SPST |
Turn On Delay Time |
45 ns |
Supply Type |
Single |
Bandwidth |
54MHz |
Turn-Off Delay Time |
90 ns |
Collector Emitter Breakdown Voltage |
-100V |
Number of Gates |
4 |
-3db Bandwidth |
37MHz |
On-State Resistance (Max) |
400Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
5pF |
On-state Resistance Match-Nom |
15Ohm |
Switch Circuit |
SPST - NO |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Crosstalk |
-80dB @ 1MHz |
Voltage - Supply, Single (V+) |
3V~18V |
Normal Position |
NO |
Height |
3.68mm |
Length |
19.56mm |
Width |
6.6mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
MC14016BCPG Overview
The electrical component comes in 14-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Through Hole is this multiplexer. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature around -55°C~125°C TA extended. In total, there have been 14 terminations. A 1 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. Electronic part bodies are injected with 14 pins. The analog switch ics are built using SPST - NO switching circuits. Look for analog switch ic variants by searching with MC14016B. An switch multiplexer with 400Ohm internal resistance has a value of 400Ohm. The datasheets for the 14 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 18V voltage to the switch device. A cost-effective Single supply type analogue multiplexer. A low voltage of 3V should be applied to the electronic component. This analogue multiplexer requires a voltage of 3V~18V when it drains from a single voltage supply. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. 15V operating voltages are supported by the electronic component. There are various bandwidths available for data transfer.
MC14016BCPG Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 37MHz
Bandwidth: 54MHz
MC14016BCPG Applications
There are a lot of ON Semiconductor MC14016BCPG Analog Switches & Multiplexers ICs applications.
- Medical systems
- Audio and video signal routing
- Private Branch Exchange (PBX)
- SONET/SDH ADM
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Precision instrumentation
- Remote Powered Equipment
- Frame Relay Equipment
- Video signal routing
- PDAs