MC14016BD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 400Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC14016B |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Power Supplies | 5/15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Throw Configuration | SPST |
| Turn On Delay Time | 45 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 90 ns |
| -3db Bandwidth | 37MHz |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -80dB @ 1MHz |
| Voltage - Supply, Single (V+) | 3V~18V |
| Normal Position | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC14016BD Overview
Presented in 14-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -55°C~125°C TA extended. A total of 14 terminations have been recorded. The electronic part delivers high-quality output through its 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. The electrical component body receives 14 pins. SPST - NO switching circuits are used in these analog switch ics. A 4 circuit is present in this switch device. Using the MC14016B search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 400Ohm. For details about the functions of 14 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 18V in normal situations. Digital switch that provides Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 3V. A voltage of 3V~18V is required to drain this analog switch from a single voltage supply. This analog switch ic utilizes SEPARATE OUTPUT output.
MC14016BD Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 37MHz
MC14016BD Applications
There are a lot of ON Semiconductor MC14016BD Analog Switches & Multiplexers ICs applications.
- RGB switches
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Central office
- Data switching
- Relay Replacement
- SDH
- Avionics
- T1/E1 Terminals
- Remote wireless modules
- Cross Connects
