Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
Resistance |
400Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC14016B |
Pin Count |
14 |
Polarity |
Non-Inverting |
Power Supplies |
5/15V |
Number of Channels |
1 |
Max Supply Voltage |
18V |
Min Supply Voltage |
3V |
Power Dissipation |
500mW |
Throw Configuration |
SPST |
Propagation Delay |
45 ns |
Turn On Delay Time |
45 ns |
Number of Inputs |
4 |
Halogen Free |
Halogen Free |
Supply Type |
Single |
Bandwidth |
54MHz |
Turn-Off Delay Time |
90 ns |
-3db Bandwidth |
37MHz |
On-State Resistance (Max) |
400Ohm |
High Level Output Current |
25mA |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
1:1 |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
5pF |
On-state Resistance Match-Nom |
15Ohm |
Switch Circuit |
SPST - NO |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Crosstalk |
-80dB @ 1MHz |
Voltage - Supply, Single (V+) |
3V~18V |
Normal Position |
NO |
Height |
1.5mm |
Length |
8.75mm |
Width |
4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC14016BDR2G Overview
The electrical component comes in 14-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 1:1. An extended operating temperature of -55°C~125°C TA degrees Celsius. Totally, there are 14 terminations. The electronic part provides high-quality output because it has 1 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. As part of its design, the 14 series is equipped with this electronic component. Multiplexers built on a SPST - NO switching circuit are built. Try searching for MC14016B variants of the analog switch ic. The internal resistance of this digital multiplexer is 400Ohm. For details about the functions of 14 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 18V volts for the multiplexer. Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 3V. A voltage of 3V~18V is required to drain this analog switch from a single voltage supply. The electrical component supports 4 inputs. It is possible to transfer data over a 54MHz-bandwidth.
MC14016BDR2G Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 37MHz
Bandwidth: 54MHz
MC14016BDR2G Applications
There are a lot of ON Semiconductor MC14016BDR2G Analog Switches & Multiplexers ICs applications.
- Medical systems
- Audio/video switches
- Avionics
- Industrial control systems
- Cable Modem
- Modems
- Audio and video signal routing
- Audio and video routing
- Medical Instrumentation
- Isolation