MC14016BFELG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Resistance | 400Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC14016B |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Power Supplies | 5/15V |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Power Dissipation | 500mW |
| Throw Configuration | SPST |
| Turn On Delay Time | 45 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 90 ns |
| -3db Bandwidth | 37MHz |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -80dB @ 1MHz |
| Voltage - Supply, Single (V+) | 3V~18V |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC14016BFELG Overview
Presented in 14-SOIC (0.209, 5.30mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operation at a temperature around -55°C~125°C TA. Totally, there are 14 terminations. A high-quality output is provided by the electrical component's 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. The electronic part body is injected with 14 pins. These analog multiplexers are built based on SPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with MC14016B. As far as internal resistance is concerned, it has 400Ohm. The datasheets for the 14 pins explain the functions. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 18V to the switch device in normal circumstances. Analog switch ics with Single supply type are cost-effective. It is recommended to use 3V as the lowest voltage for the electrical part. This analogue multiplexer requires a voltage of 3V~18V when it drains from a single voltage supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Operating the 4 inputs requires 4 inputs.
MC14016BFELG Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 37MHz
MC14016BFELG Applications
There are a lot of ON Semiconductor MC14016BFELG Analog Switches & Multiplexers ICs applications.
- RGB switches
- Microwave transmission systems
- Fiber to the Home
- Video signal routing
- Channel Banks
- Digital cross connects (DSX-1)
- Industrial and process control systems
- Sample hold systems
- Microprocessor Controlled Analog Systems
- Relay Replacement
