MC14027BCPG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 4.535924g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Current Rating | 2.25μA |
| Base Part Number | 4027 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 8.8mA |
| Clock Frequency | 13MHz |
| Propagation Delay | 450 ns |
| Turn On Delay Time | 50 ns |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8.8mA 8.8mA |
| Breakdown Voltage | 27.05V |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 100ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 6.5 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 3.43mm |
| Length | 19.55mm |
| Width | 6.85mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC14027BCPG Overview
The package is in the form of 16-DIP (0.300, 7.62mm). A package named Tubeincludes it. Currently, the output is configured to use Differential. JK flip flop uses Positive Edgeas the trigger. There is an electric part mounted in the way of Through Hole. A voltage of 3V~18Vis used as the supply voltage. A temperature of -55°C~125°C TAis used in the operation. This logic flip flop is classified as type JK Type. This type of FPGA is a part of the 4000B series. This D flip flop should not have a frequency greater than 13MHz. As a result, it consumes 4μA of quiescent current without being affected by external factors. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 4027. The power supply voltage is 5V. Its input capacitance is 5pFfarads. It is mounted in the way of Through Hole. Basically, it is designed with a set of 16 pins. This device has the clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. For normal operation, the supply voltage (Vsup) should be kept above 3V. The superior flexibility is achieved through the use of 2 circuits. A reliable performance of this D flip flop makes it well suited for use in RAIL. This T flip flop features a maximum design flexibility due to its output current of 8.8mA.
MC14027BCPG Features
Tube package
4000B series
16 pins
MC14027BCPG Applications
There are a lot of ON Semiconductor MC14027BCPG Flip Flops applications.
- Balanced Propagation Delays
- Circuit Design
- Latch
- ESD performance
- Modulo – n – counter
- Computing
- Convert a momentary switch to a toggle switch
- Load Control
- ESCC
- Parallel data storage
