MC14040BCP
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Packaging | Rail/Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Current - Output | 10mA |
| Number of Bits | 12 |
| Propagation Delay | 1 μs |
| Turn On Delay Time | 3.25 μs |
| Logic Function | Counter |
| Trigger Type | NEGATIVE EDGE |
| Number of Output Lines | 12 |
| fmax-Min | 4.5 MHz |
| Count Direction | UP |
| Load/Preset Input | NO |
| Mode of Operation | ASYNCHRONOUS |
| Height Seated (Max) | 4.44mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
MC14040BCP Overview
A PDIPpackage is used for this device. This configuration uses 16terminations. This device is fully flexible due to the supply voltage of [0]. In this diagram, there are 1elements that are interconnected by wires. The number of all component pins is 16. As a result, it is packaged in the way of a Rail/Tube. As part of the circuit, there are 16pins used to connect other components. It is mounted in the manner of [0]. The are 12 bits information in the device. There is a temperature grade of MILITARYon this device. This device operates at 125°C°C for extended periods of time with acceptable electrical stability. Generally, it is designed to operate over a range of temperatures with a lower temperature limit at -55°C. The maximum voltage that can be applied to the device is 18V. There is a minimum voltage available for the device of 3V. There are 12output lines on the device. A current of 10mAflows into the output terminal.
MC14040BCP Features
Embedded in the PDIP package
MC14040BCP Applications
There are a lot of ON Semiconductor MC14040BCP Counters & Dividers applications.
- Binary counter/decoder
- ANALOG SIGNAL PROCESSING
- Fixed and programmable counters greater than 10
- Timing applications
- Frequency dividers
- Fixed or Programmable Frequency Division
- Signal gating
- DIVISION
- Decade counter/decimal decode display (CD4017B）
- TRUE RMS-TO-DC CONVERSION
