MC14043BFELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 4043 |
| Pin Count | 16 |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 120 ns |
| Quiescent Current | 6nA |
| Turn On Delay Time | 60 ns |
| Logic Function | Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8.8mA 8.8mA |
| Logic Type | S-R Latch |
| Prop. Delay@Nom-Sup | 350 ns |
| Trigger Type | HIGH LEVEL |
| Number of Input Lines | 8 |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC14043BFELG Overview
In the 16-SOIC (0.209, 5.30mm Width) package, it can be found as an embedded module. It is packaged in the way of Tape & Reel (TR). Tri-State is used for the output it is configured with. There is S-R Latch logic type for this electrical device. According to Surface Mount, this electronic part is mounted. It operates at a voltage of 3V~18V. During operation, the temperature is set at -55°C~125°C. The 4000B series of FPGAs is the one this FPGA belongs to. With this electronic part, there are 4 bits. As far as this device is concerned, it has no terminations. It belongs to 4043 family. With the supply voltage set at 5V, it is able to operate. There are 16 pins attached to it. The device has 16 pins. Surface Mount is the way in which this electronic part is mounted. In order to operate properly, the supply voltage (Vsup) should be greater than 3V. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Based on its reliable performance, this device is appropriate for TAPE AND REEL. Without external influences, it consumes 6nA quiescent current. This element consists of 1. 4 circuits are used to achieve superior flexibility.
MC14043BFELG Features
16-SOIC (0.209, 5.30mm Width) package
4000B series
4 Bits
4043 family
16 pin count
16 pins
1 elements
MC14043BFELG Applications
There are a lot of ON Semiconductor MC14043BFELG Latches applications.
- Decade counting 7-segment decimal display
- Double bus register system
- Control circuits
- Phase comparator
- Bus system register with enable parallel lines at bus side
- Synchronous frequency dividers
- Parallel data storage
- Relay
- Up/down difference counting
- Stacked or Push-Down Registers
