Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
1.05kOhm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC14051B |
Pin Count |
16 |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
18V |
Min Supply Voltage |
3V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Nominal Supply Current |
15nA |
Power Dissipation |
500mW |
Throw Configuration |
SP8T |
Propagation Delay |
90 ns |
Turn On Delay Time |
700 ns |
Logic Function |
Demultiplexer, Demux, Multiplexer, Mux |
Number of Inputs |
8 |
Halogen Free |
Halogen Free |
Supply Type |
Dual |
Bandwidth |
17MHz |
Turn-Off Delay Time |
700 ns |
On-State Resistance (Max) |
280Ohm |
High Level Output Current |
25mA |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
50 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
7.5pF |
On-state Resistance Match-Nom |
25Ohm |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Switching |
BREAK-BEFORE-MAKE |
Voltage - Supply, Single (V+) |
3V~18V |
Signal Current-Max |
0.025A |
Height |
1.5mm |
Length |
10mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MC14051BDR2G Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Around -55°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. By its 8 channels, the electronic component provides high-quality output. A 5V voltage supply should turn on and run the electronic component. An electrical component of this type can be found in the 16 series. 1 circuits are used in this analogue multiplexer. MC14051B can be used to search for analog multiplexer variants. A 1.05kOhm internal resistance characterizes this multiplexer. Datasheets for 16 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. Users should never supply a voltage higher than 18V to a switch device. A analog switch ic that has a cost-effective Dual supply type. It is recommended to use 3V as the lowest voltage for the electrical part. This analogue multiplexer requires a voltage of 3V~18V when it drains from a single voltage supply. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. There are 8 inputs to be operated. It is possible to transfer data over a 17MHz-bandwidth.
MC14051BDR2G Features
8 Channels
Bandwidth: 17MHz
MC14051BDR2G Applications
There are a lot of ON Semiconductor MC14051BDR2G Analog Switches & Multiplexers ICs applications.
- Medical
- Imaging
- Wireless Local Loop
- Fault Tolerant Systems
- Fiber In The Loop (FITL)
- Relay replacements
- Central office
- Low-Voltage
- Video switching
- Signal routing between systems