MC14051BF
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC14051B |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 18V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Throw Configuration | SP8T |
| Propagation Delay | 90 ns |
| Turn On Delay Time | 700 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Dual |
| Bandwidth | 17MHz |
| Turn-Off Delay Time | 700 ns |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 70Ohm |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~18V |
| Signal Current-Max | 0.025A |
| Height Seated (Max) | 2.05mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 280Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
MC14051BF Overview
Presented in 16-SOIC (0.209, 5.30mm Width), this electrical component is convenient for overseas shipping. The advanced packaging method Tube provides high reliability. In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Increasing operating temperature to around -55°C~125°C TA. 16 terminations have been made so far. The electronic part delivers high-quality output through its 8 channels. A 5V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the body of the electronic part. It consists of 1 circuits. Look for analog switch ic variants by searching with MC14051B. An switch multiplexer with 280Ohm internal resistance has a value of 280Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. Multiplexer or Switches is a typical switch device. An effective Dual supply digital multiplexer. Analogue multiplexers require a 3V~18V voltage to drain from a single voltage supply. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. This electrical part is compatible with 18V operating voltages. 17MHz bandwidths enable data to be transferred.
MC14051BF Features
8 Channels
Bandwidth: 17MHz
MC14051BF Applications
There are a lot of ON Semiconductor MC14051BF Analog Switches & Multiplexers ICs applications.
- PBX interfaces
- Sample-and-hold systems
- PDAs
- Precision test equipment
- High speed data transmission line cards
- Avionics
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Microwave transmission systems
- Industrial and process control systems
- SDH
