MC14051BFEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 280Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC14051B |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 500mW |
| Throw Configuration | SP8T |
| Propagation Delay | 90 ns |
| Turn On Delay Time | 700 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual |
| Bandwidth | 17MHz |
| Turn-Off Delay Time | 700 ns |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 70Ohm |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~18V |
| Signal Current-Max | 0.025A |
| Height Seated (Max) | 2.05mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC14051BFEL Overview
This electronic part is conveniently packaged in 16-SOIC (0.209, 5.30mm Width), making it easy to ship abroad. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 8:1. The operating temperature is extended to around -55°C~125°C TA. There are 16 terminations totally. A high-quality output is provided by the electrical component's 8 channels. An 5V voltage supply should allow the electrical part to be turned on and run. An electrical component of this type can be found in the 16 series. A 1 circuit is present in this switch device. Look for analog switch ic variants by searching with MC14051B. In this multiplexer, the internal resistance is 280Ohm. To find out what the 16 pins do, please refer to the datasheets. Multiplexer or Switches is a typical switch device. Multiplexers should not be powered above 18V in normal situations. Dual supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 3V. This analog switch requires a voltage of 3V~18V to drain from a single voltage supply. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. Operating 8 inputs is required. 17MHz bandwidths enable data to be transferred.
MC14051BFEL Features
8 Channels
Bandwidth: 17MHz
MC14051BFEL Applications
There are a lot of ON Semiconductor MC14051BFEL Analog Switches & Multiplexers ICs applications.
- Data switching
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Battery Powered Instruments
- Audio/video switches
- Communication systems
- DSLAMs
- DSUs
- Communication systems
- Video signal routing
- PDAs
