MC14051BFELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 280Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC14051B |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 500mW |
| Throw Configuration | SP8T |
| Propagation Delay | 90 ns |
| Turn On Delay Time | 700 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 8 |
| Supply Type | Dual |
| Bandwidth | 17MHz |
| Turn-Off Delay Time | 700 ns |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 25Ohm |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~18V |
| Signal Current-Max | 0.025A |
| Height Seated (Max) | 2.05mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC14051BFELG Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.209, 5.30mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. There is 8:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -55°C~125°C TA are extended for operation. There are 16 terminations totally. A electrical component with 8 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. An electrical component of this type can be found in the 16 series. There are 1 circuits in this switch device. Use MC14051B to search for variants of the digital switches. A 280Ohm internal resistance characterizes this multiplexer. For functions related to 16 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. A voltage higher than 18V should not normally be supplied to the switches. A cost-effective Dual supply type analogue multiplexer. There should be 3V voltage fed to the electrical part below 3V. The voltage required by this switch device is 3V~18V, draining from a single voltage supply. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. The 8 inputs need to be operated in order to work. 17MHz-bandwidths can be used to transfer data between multiplexers.
MC14051BFELG Features
8 Channels
Bandwidth: 17MHz
MC14051BFELG Applications
There are a lot of ON Semiconductor MC14051BFELG Analog Switches & Multiplexers ICs applications.
- Fiber In The Loop (FITL)
- Remote Powered Equipment
- Access Concentrators
- Precision data acquisition
- Fiber to the Home
- Cell phones
- Relay replacements
- Channel Banks
- Cross Connects
- Communications systems
